Slide on Tow Mirrors F-150 2013
The following users liked this post:
Aggie_90 (07-16-2013)
#13
Girthy Member
I have a pair of these I used for over a year with my now traded in 2011 XLT and they worked great.
Now that I have painted mirrors (FX2), I probably won't use them. Has anyone with painted mirrors used these?? They started to leave a solid line of wear on my plastic XLT mirrors from sliding them on and off, and I guess micro-movement in the wind........
Now that I have painted mirrors (FX2), I probably won't use them. Has anyone with painted mirrors used these?? They started to leave a solid line of wear on my plastic XLT mirrors from sliding them on and off, and I guess micro-movement in the wind........
The following users liked this post:
Aggie_90 (07-17-2013)
#14
My **** mirrors do have a cutout for the turn signals but do not have one for the reflectors. That MAY be why **** says they're not compatible. I don't know. But other than that they work just fine on my SCrew. My mirrors are not painted.
#15
Senior Member
I use the **** on my Plat. I usually put a paper towel between the addition and the mirror just in case it could scratch the chrome cap. I've never had an issue.
#16
I bought and tried a set from "LongView". Waste of time and $$$. Drivers side just fit on, the top had a gap, covers signals and reflector!
PASSENGER SIDE WOULD NOT EVEN GO ON!! has a J hook that hooks on the inside part of mirror and hold the back of the cover onto the trucks mirror. it didn't line up. Almost like it was ment for the 04-08 models yet it says on the box 2009-2013 models.
PASSENGER SIDE WOULD NOT EVEN GO ON!! has a J hook that hooks on the inside part of mirror and hold the back of the cover onto the trucks mirror. it didn't line up. Almost like it was ment for the 04-08 models yet it says on the box 2009-2013 models.
The following users liked this post:
Aggie_90 (07-22-2013)
#17
Senior Member
I do take them off when I get to my destination though, as the strips of foam tape stick to my mirror caps if I leave them on too long (several days).
They also have a cutout for the puddle lights, if you have them in your mirrors.
#18
Senior Member
#19
Power Mirrors
Thanks!
#20
Senior Member
I replaced my **** with these and they are much better and they work with my power fold mirrors.
They do leave a mark from the foam tape on my chrome cap mirrors, but it wipes right off.
They do leave a mark from the foam tape on my chrome cap mirrors, but it wipes right off.