Skid Plates!!
#22
F150 Vendor
Thread Starter
These skid plates will fit 2wd trucks! Only the 09+ models though.
Hey everyone I have an overstock of standard front plates for the 09-13 and need to clear some space immediately so I am going to run a special coupon for 24 hours only that will get you 35% off one of these!!! Type in the code F150Front at checkout to get the discount and remember this is for the standard front plate only and does not apply to any other plate.
Hey everyone I have an overstock of standard front plates for the 09-13 and need to clear some space immediately so I am going to run a special coupon for 24 hours only that will get you 35% off one of these!!! Type in the code F150Front at checkout to get the discount and remember this is for the standard front plate only and does not apply to any other plate.
__________________
http://www.rcimetalworks.com
http://www.rcimetalworks.com
#23
F150 Forum
iTrader: (1)
Pics of my RCI Metalworks Plates and Stock Comparison
Here's a couple of looks at the RCI metalworks skidplates on my 2013 FX4 EcoBoost.
Also....take a look at the comparison pic: Stock vs RCI Metalworks. LOTS more protection.....and...um...we can ALL use more protection
Northlight
Also....take a look at the comparison pic: Stock vs RCI Metalworks. LOTS more protection.....and...um...we can ALL use more protection
Northlight
#24
I am thirsty
Curt makes a skid plate that can be inserted into a hitch receiver the problem with that design is its small. What are the chances of you guys building on this removable skid plate idea but bigger? I do travel off the beat and path occasionally and avoid the rough stuff. By having this skid plate inserted in your front hitch receiver you would have added protection and early warning if you have a clearance issue. I would not expect it to allow me to skid over a boulder; I would stop.The nice thing about this design is its removable when not in use.
What I would like to see is 20” wide and the length of the plate on the angle 8”.What are the chances of getting something like this built ? Are we looking at big CDN bucks?
What I would like to see is 20” wide and the length of the plate on the angle 8”.What are the chances of getting something like this built ? Are we looking at big CDN bucks?
Last edited by venture8; 05-10-2013 at 12:16 AM.
#25
SkallyWag
do you offer active duty military discount??
The following users liked this post:
HM8404 (08-28-2013)
#26
F150 Vendor
Thread Starter
This is clearly a bit late.... but YES! we do offer a military discount. Give us a call and we would be glad to help you out.
__________________
http://www.rcimetalworks.com
http://www.rcimetalworks.com
The following users liked this post:
HM8404 (08-28-2013)
#28
F150 Vendor
Thread Starter
Hey guys just wanted to let you know, this is posted on a few other threads but we are doing a group buy from now until the end of the week. 15% off all skid plates, you can use the following link to receive the discount.
http://www.rcimetalworks.com/09-13-F...Augustgroupbuy
Thanks!
http://www.rcimetalworks.com/09-13-F...Augustgroupbuy
Thanks!
__________________
http://www.rcimetalworks.com
http://www.rcimetalworks.com