Show Off your STX Pics!!!
#1821
it's plasti dip, put tape from top of left taillight to top or right same with bottom, then covered the parts I didn't want sprayed. put around 5 coats. been about a year with it. trick to get the line to come straight is it has to be wet. I sprayed the edge of where the tape is and then started taking it off. if you don't it will pull alot of it and line will be ugly.
#1823
#1825
Senior Member
Besides that I'm just going to go over it mechanically with a fine tooth comb like I would any customers car. I know at the very least I'll be putting a set of cryo treated rotors on it. Doing the oil change, checking the other fluids. Air filter, etc.
I already have my Mustang that I continually mod so if I also start dumping cash into the truck, voiding the warranty, and stuff like that I'll be dealing with one pissed off wife. That's something I aim to avoid.
The following users liked this post:
RaceRed14 (01-29-2017)
#1829
Senior Member
Been awhile since I've posted in here. Got a 2" level and 275/70r18 bfg ko2's. Did a XLT vent swap and cluster swap. Tried to keep myself from doing it but I couldn't help it being on this site! Cluster is by far my favorite, love how the vents tie it together. Im thinking black clazzio seat covers are in my future. My grey seats are starting to look dirty.
Last edited by NukeWelder; 01-29-2017 at 10:37 AM.
The following users liked this post:
RaceRed14 (01-29-2017)
#1830
Senior Member
Been awhile since I've posted in here. Got a 2" level and 275/70r18 bfg ko2's. Did a XLT vent swap and cluster swap. Tried to keep myself from doing it but I couldn't help it being on this site! Cluster is by far my favorite, love how the vents tie it together. Im thinking black clazzio seat covers are in my future. My grey seats are starting to look dirty.