When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
And here it is a few months later - added a 2" block to the rear (so the truck would sit level when towing my travel trailer... and for more clearance when offroading.)
And here it is a few months later - added a 2" block to the rear (so the truck would sit level when towing my travel trailer... and for more clearance when offroading.)
Icon Stage 2 lift/level with delta joint upper control arms. Halo lifts 2.25” rear axle blocks to give the rear a 1” rise and overall I have 3/4” of rake from rear to front. Can’t see it on the inclined old driveway but it’s there. 18” Fuel Vectors on Nitto Ridge Grapplers 285/70R18. 34”ish tire
2.5" level front only. Wheel specs are basically identical to Raptor wheels.
Started off with true 35x12.5 tires, and replaced with nitto terra grappler E-load range 315/70/17's like the raptors. Has treated me very well. Primarily used to get me to the lake/ocean or hunting spots, so I have no time for getting stuck or tires hitting and preventing me from getting where I need to go off road. Driven over smaller fallen trees, and through water up to the doors, and all kinds of grades and terrain.
2013 4x4 5.0 mpt/raptor exhaust 2” front/back lvl 315/70/17 duratracs 17x9 -6 offset Trimmed plastic and ground pinch weld. A lot of tire outside fender Time for some fender flares/mudflaps
btw love how the truck rides with these tires. Had 33” E rated nittos that wore awesome but rattled my teeth. These D rated duras are beauty in the snow and comfy on the highway. Mpg drop by 1 from the 33” 15city/18.5highway lowermost now on winter gas and remote start idle times.
RedRobin, any more pics with those tires? I have a 2016 XLT with the 5100's set to 2.1" and I'm looking at getting those exact 295/60/20 Ridge Grapplers on my OE Special Edition wheels. How do you like the tires so far?
RedRobin, any more pics with those tires? I have a 2016 XLT with the 5100's set to 2.1" and I'm looking at getting those exact 295/60/20 Ridge Grapplers on my OE Special Edition wheels. How do you like the tires so far?
RedRobin, any more pics with those tires? I have a 2016 XLT with the 5100's set to 2.1" and I'm looking at getting those exact 295/60/20 Ridge Grapplers on my OE Special Edition wheels. How do you like the tires so far?
Yeah here's the only other picture I have on my phone you can find more in my build thread. I absolutely love these tires. I have about 40k miles on them. For how aggressive the tread is they dont make much road noise and they perform well offroad. I would definitely recommend them and will be buying them again.
Yeah here's the only other picture I have on my phone you can find more in my build thread. I absolutely love these tires. I have about 40k miles on them. For how aggressive the tread is they dont make much road noise and they perform well offroad. I would definitely recommend them and will be buying them again.
Awesome! I'm glad to hear that. My last set of tires were the Mickey Thompson ATZ P3's and they were a let down. Definitely not the original ATZ's, which I got 108,000km out of (67,000 miles). I've heard the tires are quiet, not that it would matter with my exhaust. Glad I could find someone with the exact tire size I want! Thanks again!
2 1/2" Autospring leveling kit in the front. 18x9 -12 offset Vision Prowlers with 295/70/18s. And I'm 5'11".
new tires on and stock 275/55/20s next to it. Yellow line shows what had to be trimmed.
12-13-2018, 04:47 PM
