Show me some leveled out F150s with 33-35 tires
#11
And here it is a few months later - added a 2" block to the rear (so the truck would sit level when towing my travel trailer... and for more clearance when offroading.)
And here it is a few months later - added a 2" block to the rear (so the truck would sit level when towing my travel trailer... and for more clearance when offroading.)
And here it is a few months later - added a 2" block to the rear (so the truck would sit level when towing my travel trailer... and for more clearance when offroading.)
#12
Icon Stage 2 lift/level with delta joint upper control arms. Halo lifts 2.25” rear axle blocks to give the rear a 1” rise and overall I have 3/4” of rake from rear to front. Can’t see it on the inclined old driveway but it’s there. 18” Fuel Vectors on Nitto Ridge Grapplers 285/70R18. 34”ish tire
The following users liked this post:
kmilke22 (12-14-2018)
#13
2.5" level front only. Wheel specs are basically identical to Raptor wheels.
Started off with true 35x12.5 tires, and replaced with nitto terra grappler E-load range 315/70/17's like the raptors. Has treated me very well. Primarily used to get me to the lake/ocean or hunting spots, so I have no time for getting stuck or tires hitting and preventing me from getting where I need to go off road. Driven over smaller fallen trees, and through water up to the doors, and all kinds of grades and terrain.
Started off with true 35x12.5 tires, and replaced with nitto terra grappler E-load range 315/70/17's like the raptors. Has treated me very well. Primarily used to get me to the lake/ocean or hunting spots, so I have no time for getting stuck or tires hitting and preventing me from getting where I need to go off road. Driven over smaller fallen trees, and through water up to the doors, and all kinds of grades and terrain.
The following users liked this post:
kmilke22 (12-14-2018)
The following 2 users liked this post by RedRobinFX4:
kmilke22 (12-14-2018),
WheatleyF150 (12-14-2018)
#15
2013 4x4 5.0 mpt/raptor exhaust 2” front/back lvl 315/70/17 duratracs 17x9 -6 offset Trimmed plastic and ground pinch weld.
A lot of tire outside fender
Time for some fender flares/mudflaps
btw love how the truck rides with these tires. Had 33” E rated nittos that wore awesome but rattled my teeth. These D rated duras are beauty in the snow and comfy on the highway. Mpg drop by 1 from the 33” 15city/18.5highway lowermost now on winter gas and remote start idle times.
Last edited by g0rilla; 12-14-2018 at 01:08 PM.
The following users liked this post:
kmilke22 (12-14-2018)
#16
Member
RedRobin, any more pics with those tires? I have a 2016 XLT with the 5100's set to 2.1" and I'm looking at getting those exact 295/60/20 Ridge Grapplers on my OE Special Edition wheels. How do you like the tires so far?
#17
Member
#18
Senior Member
#19
Member
Yeah here's the only other picture I have on my phone you can find more in my build thread. I absolutely love these tires. I have about 40k miles on them. For how aggressive the tread is they dont make much road noise and they perform well offroad. I would definitely recommend them and will be buying them again.
Attachment 551469
Attachment 551469
#20
2 1/2" Autospring leveling kit in the front. 18x9 -12 offset Vision Prowlers with 295/70/18s. And I'm 5'11".
new tires on and stock 275/55/20s next to it. Yellow line shows what had to be trimmed.
Jim