Shifter Lever Ideas
#12
Senior Member
I think that's what I'm going to do with my dash. Was it hard to get the around the edges without creasing and were can you buy it it? I'm wanting to do my dash in the wrap not my shifter since in case anyone was wondering.
Last edited by 11rangerZ520; 05-10-2013 at 04:11 PM.
#13
It's not hard, just takes time and you definitely need a heat gun to help stretch material over corners to eliminate creases. Also, around the sharp edges you will want to apply the 3m adhesive primer no. 94, before wrapping to help keep corners from delaminating. I bought a 5 ft by 12in strip off eBay. Just make sure it's real 3m di noc.
#15
Senior Member
Thread Starter
Originally Posted by Yones
Picture a promised.
#17
#19
Senior Member
Thread Starter
Originally Posted by Yones
Check out 3m's website, just us google. Look for their di-noc vinyl. They have many different colors and patterns
#20
Yes you can wrap it around behind the covers. I used a flat tip screwdriver at the bottom edge facing the center console to pop the handles off.