Rough Country Winch Plate and Winch
#62
Just ordered/received the RC hidden winch mount and RC 12k winch with steel cable. Unfortunately the mounting plate was damaged somewhat in shipment so sorting that out before I install it. I'll be sure to take pictures!
The following users liked this post:
raif281 (12-03-2019)
#63
Member
The following 2 users liked this post by RLXXI:
66 Fairlane GT (01-16-2020),
rsylvstr (11-20-2018)
#64
How's she goin' eh?
It was mentioned in another thread about adding a led light bar to the space where the mount goes. Could you drill holes in the RC plate and make a couple mounts to attach a light bar just above the winch fairlead? For those who don’t want to mount behind the grill.
#65
Just purchased a 13 5.0 and thinking about getting this because I have a Warn winch sitting in my garage I took off my jeep awhile back. I think it might be a m8000 I'd have to check. If so I guess I'd sell it and get a 12k winch.
Does the top of the winch that gets moved come with hardware to bolt it in, or is it more of a zip tie figure out out kinda thing?
Anyone know roughly what the drop in the front of a stock truck would be because of adding a winch? I know it would probably depend on the brand and size winch one would get. I'm thinking maybe 1/4".
Does the top of the winch that gets moved come with hardware to bolt it in, or is it more of a zip tie figure out out kinda thing?
Anyone know roughly what the drop in the front of a stock truck would be because of adding a winch? I know it would probably depend on the brand and size winch one would get. I'm thinking maybe 1/4".
#66
Just purchased a 13 5.0 and thinking about getting this because I have a Warn winch sitting in my garage I took off my jeep awhile back. I think it might be a m8000 I'd have to check. If so I guess I'd sell it and get a 12k winch.
Does the top of the winch that gets moved come with hardware to bolt it in, or is it more of a zip tie figure out out kinda thing?
Anyone know roughly what the drop in the front of a stock truck would be because of adding a winch? I know it would probably depend on the brand and size winch one would get. I'm thinking maybe 1/4".
Does the top of the winch that gets moved come with hardware to bolt it in, or is it more of a zip tie figure out out kinda thing?
Anyone know roughly what the drop in the front of a stock truck would be because of adding a winch? I know it would probably depend on the brand and size winch one would get. I'm thinking maybe 1/4".
#67
Senior Member
I'm pretty sure the m8000 can mount feet forward or down. I think it's only when you get up to the m12000 and up that you have to mount it feet forward. The m12000 and up winches are huge and won't fit anyway though. I have a Zeon 12-S Platinum in my bumper. It's a tight fit, but it fits fine. I only had to trim part of the plastic on the hood latch a little to clear the control box. The advantage of the Platinum is the wireless clutch, so I don't have to open my hood to switch between freespool and engaged. Getting the rope threaded and the thimble in was kind of a pain. Don't forget to install the protective sleeve first, or you'll end up doing it twice like I did.
#68
I'm pretty sure the m8000 can mount feet forward or down. I think it's only when you get up to the m12000 and up that you have to mount it feet forward. The m12000 and up winches are huge and won't fit anyway though. I have a Zeon 12-S Platinum in my bumper. It's a tight fit, but it fits fine. I only had to trim part of the plastic on the hood latch a little to clear the control box. The advantage of the Platinum is the wireless clutch, so I don't have to open my hood to switch between freespool and engaged. Getting the rope threaded and the thimble in was kind of a pain. Don't forget to install the protective sleeve first, or you'll end up doing it twice like I did.