Rigid Industries 6" SR2 backup LED installed
#1
Senior Member
Thread Starter
Rigid Industries 6" SR Series backup LED installed
Loved my dually's so much I decided to install a 6" SR Hybrid spot/flood combo.
Drilled and tapped two 1/4x20 holes in the hitch using the bar with brackets installed as a template.
It fits quite nicely between the break away chain tie down and the end of the hitch.
Grounded the unit to one of the bolts on the hitch mount and used my 7pin trailer plug center white/violet wire to power it up (only draws about 2amps)
Have not tested at night with the backup cam but it looks promising!
Drilled and tapped two 1/4x20 holes in the hitch using the bar with brackets installed as a template.
It fits quite nicely between the break away chain tie down and the end of the hitch.
Grounded the unit to one of the bolts on the hitch mount and used my 7pin trailer plug center white/violet wire to power it up (only draws about 2amps)
Have not tested at night with the backup cam but it looks promising!
Last edited by Robob; 07-03-2013 at 06:00 PM.
#4
Senior Member
Looks good, can't wait to see night pics.