This is that retrofit thread we talked about!
#1021
F150 Forum
PM sent Tjones2430.
Also, thanxs for the support guys, I appreciate it.
Also, thanxs for the support guys, I appreciate it.
#1022
#1023
F150 Forum
Email replied Tjones2430
#1024
Ok, so i got my retrofits installed up and running last night. I went out this morning in my garage to make some adjustments to the height of the beam and neither projector will fire now. Last night they worked perfectly. I checked the fuse on the TRS harness and the fuse was blown. No biggie, just put a new 25A fuse in and everything should be good right... nope. Neither projector will fire. My solenoids for high beams work but the projectors won't fire. I checked the bulbs they are good. The ground is good because it's wired into the ground for my halos and they work. I am stumped at the moment as what to check. I redid all the connections also. Anyone have any idea where i should start looking next? One thing i did note was that my ballasts were soaked from driving last night and i am wondering if my ballasts are bad. But that would be to much of a coincidence for both to fail like that. They are the new DSP ballasts. Scratching my head...
EDIT: I checked my highbeam, left side and right side fuses as well. All good. Any other fuse I should be checking?
EDIT: I checked my highbeam, left side and right side fuses as well. All good. Any other fuse I should be checking?
#1025
Hey guys, need a little help. I'm new to all of this but trying to learn.
Purchased Bi-xenon Morimoto stage III (D2S) kit from TRS.
I'm at the stage of trying to adjust my projectors. So I installed the harness (9006) in my truck earlier. However, I was not able to connect the harness input to the halogen bulb output. The connections are incompatible.
I have no idea what to do. Do i have the wrong harness? (I asked TRS and thats what they suggested).
Anyone have a solution for me? Any help would be appreciated. Thanks!
Purchased Bi-xenon Morimoto stage III (D2S) kit from TRS.
I'm at the stage of trying to adjust my projectors. So I installed the harness (9006) in my truck earlier. However, I was not able to connect the harness input to the halogen bulb output. The connections are incompatible.
I have no idea what to do. Do i have the wrong harness? (I asked TRS and thats what they suggested).
Anyone have a solution for me? Any help would be appreciated. Thanks!
#1026
Hey guys, need a little help. I'm new to all of this but trying to learn.
Purchased Bi-xenon Morimoto stage III (D2S) kit from TRS.
I'm at the stage of trying to adjust my projectors. So I installed the harness (9006) in my truck earlier. However, I was not able to connect the harness input to the halogen bulb output. The connections are incompatible.
I have no idea what to do. Do i have the wrong harness? (I asked TRS and thats what they suggested).
Anyone have a solution for me? Any help would be appreciated. Thanks!
Attachment 292522
Purchased Bi-xenon Morimoto stage III (D2S) kit from TRS.
I'm at the stage of trying to adjust my projectors. So I installed the harness (9006) in my truck earlier. However, I was not able to connect the harness input to the halogen bulb output. The connections are incompatible.
I have no idea what to do. Do i have the wrong harness? (I asked TRS and thats what they suggested).
Anyone have a solution for me? Any help would be appreciated. Thanks!
Attachment 292522
Hi & welcome!
Yep wrong harness - you need the H13/9008 harness. OEM bulb socket is H13.
Contact them for a replacement. Chit happens I suppose - but this is not typical of them, IMHO. Could be the Atlanty Snowmageddon futzed 'em up
good luck!
Last edited by MGD; 02-15-2014 at 01:48 PM.
#1027
Well if he ordered the 9006 harness and didn't order the H13 then that's not TRSs fault.
He even said he ordered the 9006.
You need a H13 harness. Not 9006.
He even said he ordered the 9006.
You need a H13 harness. Not 9006.