Removing the headliner in a SCREW?
Thread Starter
Junior Member
Joined: Jun 2010
Posts: 16
Likes: 0
From: Apex NC
Removing the headliner in a SCREW?
Does anyone know how to drop down the headliner in a 2010 screw? I discovered a small dent above my windshield. I think it was there from the dealer, just didn’t notice it when I took delivery because I busy admiring the rest of the truck. It looks like a prime candidate for PDR but I want to be the one to drop the headliner and see if there are support beams in the way.
Senior Member
Joined: Jun 2010
Posts: 255
Likes: 2
- Remove molding around doors
- Take screw out behind airbag emblem above seatbelt(7mm Bolt right above the Seat Belt Loop under the plastic cover)
- remove the two push in headliner hold downs in the back
- Remove rear dome light. unplug. Pops right off.
- Remove front dome light. unplug. Pops right off.
- Remove visors. phillips screws
- Remove A-pillar (pull them out- has clips)
- Coat Hanger (Torx Bit - Just unscrew)