trnaegele

this may be too late for some, but i just got mine off and didn't break a thing.

the first thing you will need is patience.

i bent two screwdrivers. one in an L and one in a J

using channel locks i loosened alll visible inner clips.

then pry up and use a straight screwdriver for the bed side of the hidden clips and the J for the outer side.

just take your time and pry along.

Hope it helps!

Ted

Yippie21

How about a pic of the naked rails? I'd like to know how they look please...

trnaegele

i will try to take some today and get them on tonight.

you can email me direct if you like.

trnaegele@ctvea.net

trnaegele

i am not sure if pictures will show or not. i don't know what i am doing.

trnaegele

i guess they did

Yippie21

Thanks... I had thought of taking mine off to have access to the stake pockets, but obviously, something else will have to be put on there.. Appreciate the effort very much.

pappcam

That doesn't look like a 09 or newer truck so I'm not sure how applicable that is here.

trnaegele

they still intall to the bed the same way. mine had removable covers to get to the pockets. this is my dads truck. my 07 and 09 were the same way.

jc05lariat

Where did you get the f-150 bed mat?

Sent from my HTC Mytouch 4G using F150 Forum

rdglide06

I can't believe what I am reading!! Get a knife, a regular knife out of your silverware drawer! On the inside in center of cap there is a cutout put knife in there slightly pry up, and put your finger under it and snap off! I just did it with one hand while talking on phone!