Regular cab, 6.5' bed, 4x4?
The following users liked this post:
McCarthy (02-28-2013)
#15
Senior Member
Thread Starter
#16
Senior Member
Thanks. Cooper Discoverer STT Tek3 in size 325/65R18 (35" x 13.5")
MB TKO wheels from Discount Tire, size 18 x something. I don't remember. I do remember the offset was -25, so it was close to the stock offset of -47. I wanted those tires pulled in as close as possible. There is very little clearance between my upper a-arm and the tire.
I did have to do some trimming of the inner fender. If I had done with a full lift kit I wouldn't have had to worry about it.
I primer-ed the bare metal, then painted it. Then epoxied over it to keep stone chips from damaging it.
MB TKO wheels from Discount Tire, size 18 x something. I don't remember. I do remember the offset was -25, so it was close to the stock offset of -47. I wanted those tires pulled in as close as possible. There is very little clearance between my upper a-arm and the tire.
I did have to do some trimming of the inner fender. If I had done with a full lift kit I wouldn't have had to worry about it.
I primer-ed the bare metal, then painted it. Then epoxied over it to keep stone chips from damaging it.