When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2012 Screw Ecoboost.
Rattles from the left front under light acceleration.
Only rattles when moving. Does not rattle if I rev it up in park.
I have no clue what it might be.
I changed out the entire IWE system and no fix.
Replaced the exhaust from the cat back. No fix.
Beyond frustrated.
EDIT>>>>>>>>>>>>>>>>>>>>>>>>FIXED
For others that search in the future......
I have a 2012 Screw Ecoboost.
Had the grinding when I turned issue and changed out the hubs/actuators/and solenoid.
The actuators were completely full of water but appeared to be new with no damage.
After changing all of these I started getting a rattle almost like a heat shield that would stop as soon as I let off the gas and resume as soon as I hit the gas again.
It would not happen sitting still. Only in motion.
So I bought a new vacuum line for the IWE and this fixed it.
I probably could solved my entire problem by draining the water and replacing the vacuum line.
But I figured if I had to go that far, might as well make the entire system new.
the door is actually a lot of times the plastic guard that's glued to the door. Ever since I ripped that **** off and installed Noico sound deadening material, I've heard no rattles.
I also tracked down a roof rattle to the dome light...took it out, installed some noico behind it, reinstalled....golden.
the door is actually a lot of times the plastic guard that's glued to the door. Ever since I ripped that **** off and installed Noico sound deadening material, I've heard no rattles.
I also tracked down a roof rattle to the dome light...took it out, installed some noico behind it, reinstalled....golden.
I recently took the water shiled off, installed noico on the outer panel and both sides of the inner panel, some on the actual door panel along with ccf behind it.
I think I added like 25lbs to the door lol.........the panel barely fits on due to the CCF.............the mother ****** still has a rattle by the door lock rod coming out of the top of the door panel whatever the hell is called.:ce nsored::ce nsored:
I recently took the water shiled off, installed noico on the outer panel and both sides of the inner panel, some on the actual door panel along with ccf behind it.
I think I added like 25lbs to the door lol.........the panel barely fits on due to the CCF.............the mother ****** still has a rattle by the door lock rod coming out of the top of the door panel whatever the hell is called.:ce nsored::ce nsored:
Yeah I had the same problem with the door panel too, just rammed it on there.
just throw some more deadener behind the lock arm!
I noticed on my truck I had a rattle coming from where the climate control and flow through console meet. I simply put my fingers in there to separate the plastic and the noise would go away. Drove me crazy and on one short ride I stuck a thick piece of folded paper in there to stop the noise. Well the paper was only there for that one ride and I took it out after, but the noise went away. Must have just pushed them apart enough so they didn't rattle against each other. Next step was to put a piece of foam in there.
My driver's seat squeaks/rattles. 2012 EB SCAB. Did it once before (2-3 years ago). I took all the bolts loose and retightened them. They were not loose, so I knew that wouldn't help. But, I wanted to look under the seat and see if anything else was loose. Didn't find anything. I started raising the seat and moving it forward slightly when I would get in and it solved it. After a while, I stopped moving the seat and the squeak was gone.
Started again about a month ago. Moving the seat doesn't stop it now.
I'll have to try the lithium spray on the rails.
My driver's seat squeaks/rattles. 2012 EB SCAB. Did it once before (2-3 years ago). I took all the bolts loose and retightened them. They were not loose, so I knew that wouldn't help. But, I wanted to look under the seat and see if anything else was loose. Didn't find anything. I started raising the seat and moving it forward slightly when I would get in and it solved it. After a while, I stopped moving the seat and the squeak was gone.
Started again about a month ago. Moving the seat doesn't stop it now.
I'll have to try the lithium spray on the rails.
probably the leather rubbing on the plastic on the right side try sticky back felt inbetween them
03-10-2017, 11:59 AM
