Ford F150 Forum - Community of Ford Truck Fans

Ford F150 Forum - Community of Ford Truck Fans (https://www.f150forum.com/)
-   2009 - 2014 Ford F150 (https://www.f150forum.com/f38/)
-   -   Pros and Cons 5.0 or 4.6 motor (https://www.f150forum.com/f38/pros-cons-5-0-4-6-motor-182739/)

Matt39 11-27-2012 10:40 PM

Pros and Cons 5.0 or 4.6 motor
 
so im new here and im definitely getting an f150 but cant decide between a 5.0 or 4.6. a bunch of pros and cons would work

Lucky_Craft 11-27-2012 10:50 PM

I had a 10 with a 3v 4.6 and now I have a 12 with a 5.0.

I felt that the 4.6 was sluggish especially towards the top end of the RPMs. I would not buy again.

So far I've been very impressed with the 5.0. Very responsive and good power throughout the rpm range.

Scrappy Doo 11-27-2012 10:52 PM

So you are looking at used trucks? Or a used one and a new one? or What?

Need more info here

Matt39 11-27-2012 11:03 PM

definitely a used truck. i plan on doing mods to it (exhaust, intake, tuner) but i was leaning towards a 5.0 because of the power.

bell4fan 11-27-2012 11:29 PM

If you want power DO NOT even consider a 4.6. The better comparison would be 5.4 or 5.0.I think most people have been happier with the 5.0 than the 5.4

XtraLargeTall 11-27-2012 11:31 PM

Depends on what you're using it for. Like Scrappy said, we need more info.

I would personally ignore the 4.6 and compare the 5.4 to the 5.0 and go from there.

smurfs_of_war 11-28-2012 12:44 AM


Originally Posted by XtraLargeTall
Depends on what you're using it for. Like Scrappy said, we need more info.

I would personally ignore the 4.6 and compare the 5.4 to the 5.0 and go from there.

Yup. The 5.4 is mod friendly too (no more than the 5.0 before i get jumped on) and might save you some cash on the initial purchase to put towards more mods :)

You wouldn't go wrong with either.

TruckLarry 11-28-2012 12:44 AM


Originally Posted by Matt39
definitely a used truck. i plan on doing mods to it (exhaust, intake, tuner) but i was leaning towards a 5.0 because of the power.

If its a 5.4, make sure the plugs have been changed.

Mlarv 11-28-2012 06:12 AM


Originally Posted by Lucky_Craft (Post 2208682)
I had a 10 with a 3v 4.6 and now I have a 12 with a 5.0.

I felt that the 4.6 was sluggish especially towards the top end of the RPMs. I would not buy again.

So far I've been very impressed with the 5.0. Very responsive and good power throughout the rpm range.

I sort have had a different experience. I had a 2004 with a 5.4 in it and I loved it. When I bought my new 2010 the salesmen said it was a 4.6 3V. I looked at him like WTF are you showing me this for you know me and how I use my truck. He stuck to his guns and said I would be happy with it. I have had it 3 years now and could not be happier. I have towed a small Bob cat a small track loader hauled 3400 pounds of dirt in the bed (I have a scale slip to prove it) and have had all the power I needed to do any of the jobs I have asked of it. I am heading from Ohio to WA state next year in it to bring back my 68 Mustang and I will be towing it. 56000 + miles on it so far.

Matt39 11-28-2012 06:33 AM

im looking for the motor that will produce decent horsepower from doing some mods. i wont be towing with it. but ive found some real nice 5.4 trucks. think itd be worth to consider a 5.4 over a 5.0?


All times are GMT -4. The time now is 09:07 PM.


© 2024 MH Sub I, LLC dba Internet Brands