nolagtime

Did my 6" Procomp lift last week, all 16 pages of instructions were followed. They use one large block (6") and then rely on 1/4" shim/spacers to add to that if the back end needs to be raised any more. We opted to leave the shims out, but after a week of driving and settling in the rear is about 3/4" lower than the front.

If anything I would like the rake about 1" the other way. What was the stock combination of rear blocks? Is there a 1" block offered on one of models (FX2) that we could add to the 6" rather than a bunch of 1/4" shims that Procomp provided?

thx.