Do I have the 2 piece badges? Pic
#1
Senior Member
Thread Starter
I removed my tailgate badge today to paint it. It looks like it is a 2 piece badge, but it is near impossible to take apart.
I had originally thought the 2 piece were on 2012 and up, but others have reports having them on 2011's, which is what I have, with an August 2011 build date.
Here is a pic of the back. The inside of the 0 pops out no problem, but the black insert comes free in some spots, but is really stuck in others.
For those that have the 2 piece, is this what it looks like? And if so any tricks on how to separate the 2 would be appreciated.
Thanks!
I had originally thought the 2 piece were on 2012 and up, but others have reports having them on 2011's, which is what I have, with an August 2011 build date.
Here is a pic of the back. The inside of the 0 pops out no problem, but the black insert comes free in some spots, but is really stuck in others.
For those that have the 2 piece, is this what it looks like? And if so any tricks on how to separate the 2 would be appreciated.
Thanks!
#3
Senior Member
Thread Starter
The following 2 users liked this post by azmidget91:
BucketMan (10-21-2013),
SpeedViktm (10-21-2013)
#5
Senior Member
I removed my tailgate badge today to paint it. It looks like it is a 2 piece badge, but it is near impossible to take apart.
I had originally thought the 2 piece were on 2012 and up, but others have reports having them on 2011's, which is what I have, with an August 2011 build date.
Here is a pic of the back. The inside of the 0 pops out no problem, but the black insert comes free in some spots, but is really stuck in others.
For those that have the 2 piece, is this what it looks like? And if so any tricks on how to separate the 2 would be appreciated.
Thanks!
I had originally thought the 2 piece were on 2012 and up, but others have reports having them on 2011's, which is what I have, with an August 2011 build date.
Here is a pic of the back. The inside of the 0 pops out no problem, but the black insert comes free in some spots, but is really stuck in others.
For those that have the 2 piece, is this what it looks like? And if so any tricks on how to separate the 2 would be appreciated.
Thanks!
#6
Senior Member
Thread Starter
Aww dude, you just totally ruined my day!
I figured I do the gate badge first as I only had a little spare time today. Was going to do the fender badges later this week.
Guess i'll get the painters tape ready.
Thanks for the heads up.
I figured I do the gate badge first as I only had a little spare time today. Was going to do the fender badges later this week.
Guess i'll get the painters tape ready.
Thanks for the heads up.