Jwlj

Have you tried running vinyl instead?

Try these guys.. it's what I run on my wifes car
Metro Restyling

Butters_33

iTrader: (1)

I did my gas cap and door handles at the same time, and while are holding up fine the drivers door handle is starting to peel. I will probably re-do it, but considering how many times it is used I'm happy.

Butters_33

iTrader: (1)

Took the Plasti-Dip off of my door handles. That is the nice thing about the stuff---you can remove it at anytime for a different look.

summertop511

Its raining out can I do my rims in the garage it is kinda humid out. I just picked up seven cans I can't wait to do my rims.

TheBlack2011FX4

Well I dunno if I would do it in my garage just in case.. But if it's humid out, just give it a longer time to dry in between coats

summertop511

O ok thanks yeah that makes sense. I'll keep the door open also.

TheBlack2011FX4

You should be fine though, good luck!

Birk830

I did all of my dip in my garage with a bandana over my face. It's very humid and windy here so the garage was my only option

DWSmoot

Well, finally caved in and decided to do some plast dippin today. Overall happy with the results and the ease of using this stuff. Did my emlems, mirror refelctors, rear Ford emblem, and front grill. Still considering doing my steps. The more black I put on the truck the more I like it more than the chrome...

Pics:

summertop511

When you do the rims do you spray where the lugs tighten in or do u put something around the hole. Upon tightening the lugz the plastidip is wrapping around the lug nut.