Perfect level amount?
#1
MattB
Thread Starter
Perfect level amount?
So what is the perfect amount to level a truck, specifically a 2014 screw 4x4 with 5.5" bed with topper. I am looking at the kits I have tagged below.
https://www.americantrucks.com/supre...excluding.html
https://www.americantrucks.com/rough...ions-0913.html
https://www.americantrucks.com/motof...ng-raptor.html
https://www.americantrucks.com/supre...excluding.html
https://www.americantrucks.com/rough...ions-0913.html
https://www.americantrucks.com/motof...ng-raptor.html
#3
Senior Member
Two inches will usually leave just a tiny amount of positive rake and isn't too hard on ball joints. That's what gets my vote.
#4
FWIW.
My truck only needed 1.75"s from bilsteins to make it perfectly level.
No rear cap or extra weight in bed.
My truck only needed 1.75"s from bilsteins to make it perfectly level.
No rear cap or extra weight in bed.
#5
FlyFisher
#6
Senior Member
I have 2" Motofab. According to my measurements the front is still 5/8" short but it looks nose high. I am thinking about swapping out blocks or putting in an add-a-leaf.