Next Mod' - Lower Grille - Platinum | Lariat
#64
Senior Member
Thread Starter
*UPDATE*
- field trial is over.
Results:- no signs of chipping, flaking, corrosion, etc..
- looks as good as the day it was installed back in Aug'2011.
- the prototype and sketch of modifications for the next gen' were handed-off today (15Mar2012) to the metal shoppe.
- externally will look the same.
- installation (if all goes right) will be "no-drill" and use the front license plate bracket mounting points.
- was told that the gen'II -blank- (pre-curved and with mounting tabs) should be available tomorrow (16Mar) or Monday (19Mar).
By end of next week I should have pic's, options, and pricing. I have created an interested parties list of userIDs (current count = 37) and in addtion to a post and/or another thread, will be sending PMs.
Apologies for all the suspenders (er, suspense) and delay. Stay tuned kiddies. And don't touch that dial ..... Last edited by gDMJoe; 03-15-2012 at 10:11 PM.
#65
Junior Member
I would like one of these as well. And I was wondering what you did to paint your grill I was told by a local body shop that the paint would peel off of the grill surround. Have you had any problems with this?
#66
Senior Member
Thread Starter
2011 platinum - I would like one of these as well.
And I was wondering what you did to paint your grill I was told by a local body shop that the paint would peel off of the grill surround. Have you had any problems with this?
Figure it's all in the prep' and the paint shoppe did (IMO) a great job.
.
#68
Senior Member
Thread Starter
Lower Grille - "Group" Buy Interest
*UPDATE*
The bare, grille -blank- has been received from the supplier and I've had a chance to prep' it. So .....
I've already PM'ed those who expressed an interest previously.
For those that may have viewed the thread and not posted or maybe I missed .....
------------------------------------------------------------
The design has been revised so that the grille is attached using the existing license plate mounting slots. It is now a no-drill installation.
At this point I am attempting to determine if there are enough actual buyers to qualify for the >= 20 group. If you're interested, please review the price list and let me know via a PM what (if anything) would be your choice. Also ... After reading this post, please let me know if you have any other questions or want additional information.
Then what ? Once the actual buyer count is established, pricing will be finalized and up-front deposits will be requested.
Why so pricey ? Co$t break-down - No excuses, just an explanation ...
Bare grille -blank- .....
Prep'ed grille -blank- .....
Mounting hardware .....
The bare, grille -blank- has been received from the supplier and I've had a chance to prep' it. So .....
I've already PM'ed those who expressed an interest previously.
For those that may have viewed the thread and not posted or maybe I missed .....
------------------------------------------------------------
The design has been revised so that the grille is attached using the existing license plate mounting slots. It is now a no-drill installation.
At this point I am attempting to determine if there are enough actual buyers to qualify for the >= 20 group. If you're interested, please review the price list and let me know via a PM what (if anything) would be your choice. Also ... After reading this post, please let me know if you have any other questions or want additional information.
Then what ? Once the actual buyer count is established, pricing will be finalized and up-front deposits will be requested.
Why so pricey ? Co$t break-down - No excuses, just an explanation ...
Grille -blank-
Preview pic's:- ¼" billet, sheet aluminum.
- grid pattern is made using a CNC waterjet cutting system. *Intricate, lengthy process.
- top mounting brackets are tig welded -AFTER- the grid is cut. *Manual process
- the amount is what the supplier bills me.
- anodized, coated pieces are purchased from NAPA with a 50% wholesale discount.
- all prep' work is manual and labor intensive. *5-6hours / grille.
- grids are rounded and smoothed using ½" (for vertical girds) and 1" (for horizonal grids) strips of 80 and then 150 grit emery cloth.
- bottom mounting tabs are ground-down and shaped to conform to bumper slots.
- mounting tab holes are drilled using a drill press.
- there is a minimum set-up fee.
- silver requires a 2coat process - base + clear.
- the amount is what the supplier bills me.
- package spec's - 22" x 7" x 3", 3-5Lbs, ship-from ZipCode = 49306 (residential).
- shipping boxes will be made specifically for the grille.
- packing material will be foam padding and bubble-wrap.
- UPS, ground, insured.
- could be waivered by ...
- buyer accepts fee when paying.
- payment is made as a Personal - Gift.
- payment is made via a check | moneyorder. *There will be 10business-day waiting period to clear.
Bare grille -blank- .....
Prep'ed grille -blank- .....
Mounting hardware .....
Last edited by gDMJoe; 03-25-2012 at 11:23 AM.
#70
Senior Member
Thread Starter
Smuber - Count me in as interested. Looks great.
... If you're interested, please review the price list and let me know what (if anything) would be your choice.
.