My Leveled Platinum on 35's
#1
Senior Member
Thread Starter
My Leveled Platinum on 35's
Been getting lots of questions so thought I would post a few photos of my setup. Lots of photos on the forum helped me, hope these help someone else with ideas, etc.
2013 Platinum Eco 4x4, 3.55 Gearing:
- 35x12.5x20 Mickey Thompson ATZ P3's on a ProComp 3" Level (taking my chances), and 3" Rear Block replacement. No rubbing, no trimming. Ride has been way better than I expected. Tires hum a bit above about 50MPH. Gas mileage went down as expected. Most of my driving is at highway speeds, very happy so far.
- BakFlip F1 Bed Cover over Linex Bed. After rain and washes haven't seen any leaking yet. Love the security it provides.
- DeeZee Easy Down tailgate, (one of the best mods I could have done, works great).
- MagnaFlow 3" CatBack Exhaust with Resonator Delete. There is a sound clip on the forum if anyone is interested. I really think the sound has gotten better since the install. Just a slightly more aggressive sound with no drone at highway speeds. Love to use the remote start just to hear the exhaust before I get in.
- 5%/10% tint. Have gone back and forth twice on my emblems. Currently off.
Overall, really happy with everything I've done. Wanted to try and achieve a clean but more aggressive stock look. Hope it helps!
2013 Platinum Eco 4x4, 3.55 Gearing:
- 35x12.5x20 Mickey Thompson ATZ P3's on a ProComp 3" Level (taking my chances), and 3" Rear Block replacement. No rubbing, no trimming. Ride has been way better than I expected. Tires hum a bit above about 50MPH. Gas mileage went down as expected. Most of my driving is at highway speeds, very happy so far.
- BakFlip F1 Bed Cover over Linex Bed. After rain and washes haven't seen any leaking yet. Love the security it provides.
- DeeZee Easy Down tailgate, (one of the best mods I could have done, works great).
- MagnaFlow 3" CatBack Exhaust with Resonator Delete. There is a sound clip on the forum if anyone is interested. I really think the sound has gotten better since the install. Just a slightly more aggressive sound with no drone at highway speeds. Love to use the remote start just to hear the exhaust before I get in.
- 5%/10% tint. Have gone back and forth twice on my emblems. Currently off.
Overall, really happy with everything I've done. Wanted to try and achieve a clean but more aggressive stock look. Hope it helps!
Last edited by GlobalPilot; 11-12-2013 at 03:44 PM.
The following users liked this post:
GlobalPilot (11-12-2013)
The following 2 users liked this post by Yuke's Retrofits:
GlobalPilot (11-12-2013),
Squatnbear (04-03-2014)
#5
Senior Member
Thread Starter
www.youtube.com/watch?v=uQsdGuQ-t6A
2013 F150 EcoBoost ~ MagnaFlow Exhaust - YouTube
Last edited by GlobalPilot; 11-12-2013 at 03:37 PM.
#6
My god that is a beauty of a truck sir. I'm going to have to go to taller blocks, seeing as though the 1.25" spacers I installed lifted the truck .5" past level. Now it looks like it has a load all the time. I like that yours is still a smidge higher in the back.
#7
Member
wow
very nice. are those stock wheels? what does the 35x12.5 translate to as far as the three digit X 2 digit number? like 255 55 or similar. Still rolling all stock on mine but i really like your setup.
Trending Topics
The following users liked this post:
GlobalPilot (11-20-2013)
The following users liked this post:
Parris.sewell (09-07-2014)