Modifications Complete; Pics
 

Alright, got some things installed and finally done for hopefully a while now... Any compliments or constructive criticisms are welcomed....

- bumper: Off Road ICI Magnum
- side steps: ICI Magnum RTs
- Headlights: Spyder Style Raptors; HIDs installed
- Plastidip: All emblems, rear lights, etc blacked out
- Grill: Raptoid Grill/ painted letters to match factory
- Rims: 20" brushed rims replaced with 20" powder coated black FX4 rims
- Air Filter: Replaced w/ K&N
- Peragon metal/locking achordian sliding bed cover
- Suspension: Biltsteins at 2.5" lift
- 2 Kicker Comp RT 12s(500w RMS/ea)
- 4 (w/tweeters) Infinity Kappa (100w/ea)
- Kicker KX Series amps to power speakers/subs
- Muffler: Replaced w/ Borla (left resonator), loud enough for me
- Handles covers purchased; plan to sand and paint to color match today/tomorrow. The previous Plastidip on handles are peeling due to constant opening/closing of door. Everything else Plastidipped is ok.

Attachment 482580

Attachment 482581

Attachment 482582

Attachment 482583

Attachment 482584

http://i6.photobucket.com/albums/y21...0A1A7AB66A.png

Attachment 482585

Attachment 482586

Attachment 482587

Attachment 482588

Nice setup. Really liking that bumper

Looks sick!

Thanks guys!

Anything you'd adjust or change?

What do you think of the 5.0L Coyote emblem? Does it take away from the black theme? Perhaps get 5.0L black emblems?

I like the bumper and the rest of the front end. You need a bit more aggressive tire IMO and I'm not of the plastidip lenses.

ditto on the tire, need to get spacers with more aggressive tread and rim.


also not fond of the rear tails covered in plasti, get a blacked out version.

Hmmm, thanks for the input.

As for the tires, I may get some spacers. The tires themselves I just got 3mo ago which cost a chunk. I'd have to wait for these to go bald. BFGs were about $250 more so I chose these at the time.... the rear tail lights can be replaced easily with blacked out housing but clear lens. Have to search ebay again.

I wanted to do led interior but don't know the sizes or how to take the caps off. Is it pretty straight forward where an eye glass screw driver will pop the housing cover off?

Interior LED is pretty easy. I bought a pack of bulbs off Amazon and changed my front dome lights, license plates, from side markers (all the same). Also did the rear dome but it was a different size...

Check this out for taillights. https://www.f150forum.com/f59/your-c...ur-end-337441/

I agree with more aggressive tires for that look you're going for but I cant stand those kind of bumpers. It looks like the truck has an under bite. Actually haven't seen an aftermarket front bumper I do like. I guess Im minimalist when it comes to trucks.