Roverandom

Another one done!

Mike FX4

Gregg, thanks for stopping by and showing me those LEDs. It was nice meeting you.

I can't wait to try the mod on mine. I'll let you know when I get the parts, so you can come over and help, lol. The tailgate assist is now something I want to do too.

SultanGris

wowser, and i paid 20$ twice cause the first ones i bought had the lights on the edge instead of the middle, lol! Thats what you get for being impatient! Nice find for sure!

ffcody7

Subscribe

henrysboy

Another one done. My leds finally arrived from china on a really slow boat. I used a white 9 light strip. I cut the positive line on the last 3 and soldered in another positive lead to give me 3 lights for park lights and 6 for signals with the signals on the outer edge. I added wiring for puddle lights ,if I find something suitable it will be easy to add them. When I figure out how to add pics I will post them. Great mod thanks for posting.

CRF450

I just did this mod yesterday and I love it, the ugly orange reflectors actually have a purpose now. I did mine through the puddle lamp hole on the bottom of the mirror, it was a pain to fit splicers on what little wire I could pull out but much easier than pulling apart the entire mirror. It took about an hour and a half to do, including the half hour I spent trying to plug the wires back onto the rear facing signal on the drivers side. I had to unplug it to get enough slack to splice off of the wires.

SSgt Crash

All done with this half of the mod, just looking for the black box write up now

Markanth0ny

I think he edited a previous post on this thread with pictures. I went to radio shack and found the bridge rectifiers, board and box. There were two different rectifiers but the other had bigger legs that wouldn't fit in the board the same way as in the pictures.

Markanth0ny

I already ran my wires from the turn signal bulbs to the passenger kick panel. The black box fits perfectly behind the fuses. I just have to run the wires thru the doors to my leds. I have a set of extra leds to test the black box before taking the door panel off.

SultanGris

i didnt make a black box, i just soldered my diodes and resistors in line in the wires and liquid taped over them