Last edit by: IB Advertising
Middle seat/Jump seat to Center Console Swap
http://www.f150forum.com//f38/middle...e-swap-146672/
ISSUE:
Middle seat/Jump seat to Center Console Swap
• User swaps stock center console for aftermarket console
• Includes step-by-step pictures
• Other users share their stories of swapping the center console
Read below for the full discussion…
http://www.f150forum.com//f38/middle...e-swap-146672/
ISSUE:
Middle seat/Jump seat to Center Console Swap
• User swaps stock center console for aftermarket console
• Includes step-by-step pictures
• Other users share their stories of swapping the center console
Read below for the full discussion…
Middle seat/Jump seat to Center Console Swap
#441
Yes they are that far off. I put holes in mine roughly where your black dots are.
#446
jump seat to Console swap in 2015 XLT?
Thanks!
Last edited by ecriv; 08-01-2015 at 08:22 PM. Reason: spelling
#447
Senior Member
I did the install yesterday. Super easy.
1. Bought off eBay -$385
2. Unbolted seats- 15mm but left electrical connected. Still plenty of room to move out of the way.
3. Removed jump seat. 4 bolts 13 mm
4. Sat new console into position. Marked holes with sharpie.
5. Removed console. Drilled pilot holes.
6. Sat console into position, hooked up 12 volt plug.
7. Used 14 X 1 1/4 self tappers with 3/8 head on them.
8. Drilled them into position. Hand tightened and re-installed seats.
9. Vacuumed
10. Done.
Jump seat for sale. Make offer.
1. Bought off eBay -$385
2. Unbolted seats- 15mm but left electrical connected. Still plenty of room to move out of the way.
3. Removed jump seat. 4 bolts 13 mm
4. Sat new console into position. Marked holes with sharpie.
5. Removed console. Drilled pilot holes.
6. Sat console into position, hooked up 12 volt plug.
7. Used 14 X 1 1/4 self tappers with 3/8 head on them.
8. Drilled them into position. Hand tightened and re-installed seats.
9. Vacuumed
10. Done.
Jump seat for sale. Make offer.
The following users liked this post:
cholywell (09-19-2015)
#448
Junior Member
I did the install yesterday. Super easy.
1. Bought off eBay -$385
2. Unbolted seats- 15mm but left electrical connected. Still plenty of room to move out of the way.
3. Removed jump seat. 4 bolts 13 mm
4. Sat new console into position. Marked holes with sharpie.
5. Removed console. Drilled pilot holes.
6. Sat console into position, hooked up 12 volt plug.
7. Used 14 X 1 1/4 self tappers with 3/8 head on them.
8. Drilled them into position. Hand tightened and re-installed seats.
9. Vacuumed
10. Done.
Jump seat for sale. Make offer.
1. Bought off eBay -$385
2. Unbolted seats- 15mm but left electrical connected. Still plenty of room to move out of the way.
3. Removed jump seat. 4 bolts 13 mm
4. Sat new console into position. Marked holes with sharpie.
5. Removed console. Drilled pilot holes.
6. Sat console into position, hooked up 12 volt plug.
7. Used 14 X 1 1/4 self tappers with 3/8 head on them.
8. Drilled them into position. Hand tightened and re-installed seats.
9. Vacuumed
10. Done.
Jump seat for sale. Make offer.
What color is your jump seat? I'm looking for a medium stone jump seat.
#450
I have a medium stone jump seat for sale.
http://www.ebay.com/itm/FORD-F150-CLOTH-CENTER-CONSOLE-JUMP-SEAT-JUMPSEAT-OUT-OF-A-2010-F150-XLT-/262020312141?fits=Make%3AFord%7CModel%3AF-150&hash=item3d01a0ac4d&vxp=mtr
http://www.ebay.com/itm/FORD-F150-CLOTH-CENTER-CONSOLE-JUMP-SEAT-JUMPSEAT-OUT-OF-A-2010-F150-XLT-/262020312141?fits=Make%3AFord%7CModel%3AF-150&hash=item3d01a0ac4d&vxp=mtr