Max tire on stock 18" rim, 2.5" front level
#11
I have the stock 18s on my 2012 xlt with a rough country 2.5 inch leveling kit with a 35x12.50 toyo open country M/T and it doesnt rub with a 1/4 inch wheel spacers for front tires. heres a pic:
edit: i had very minor rubbing in reverse with steering wheel fully locked to one side which is why i went with a 1/4 inch wheel spacer instead of "trimming"
edit: i had very minor rubbing in reverse with steering wheel fully locked to one side which is why i went with a 1/4 inch wheel spacer instead of "trimming"
Nice truck I think the open county m/t is the best looking tire in my opinion . how loud are they and do they wear good.
The following users liked this post:
eddlestone213 (02-10-2014)
#12
Senior Member
Thread Starter
2.5" front level, 305/65/18 installed, verrry slight rub, on my mud flap , very easy trim, and a weird small fender liner section, pics to follow
#13
Senior Member
Thread Starter
Slight rub at max turn, very small fender liner section
Edit --- doesn't rub here after all, just my mudflaps, I'll bolt then back (when I make it a priority)
Edit --- doesn't rub here after all, just my mudflaps, I'll bolt then back (when I make it a priority)
Last edited by Joel_980; 02-10-2014 at 10:25 AM.
#14
Senior Member
Thread Starter
Rubs at max turn on mudflap , the inside loose part, which I installed... Possibly poorly haha. A bolt with washers placed in correct spot should fix it
#15
Senior Member
Nice truck I think the open county m/t is the best looking tire in my opinion . how loud are they and do they wear good.
JOEL, Truck looks awesome man!
The following users liked this post:
Joel_980 (02-11-2014)
#17
#20
Senior Member
I just mounted pro comp xtreme at2 35x12.5x18 on a 0 offset rim. I have a 2.5" level and its 4x4 they had to do some plastic trimming but they fit perfect with only rub when the wheel is turned all the way and going over bumps. Stock rims are +44 off set.