SportTractoF150

I'd love to get a copy of those instructions too

Lyndon Dale Cook

[QUOTE=Fasttimez;1027792]Ok, so I finished the front skid plate up at work today. I welded in my spacers, then hit them with some rustoleum paint (just in case the welds decide they want to rust even though the spacers are stainless as well). You won't see it because it's on the inside of the skid plate. I modified it further by cropping the rear edges and putting a 20* bend in the rear for added safety (this way in reverse, it will deflect any objects down and away). I also cropped the edges of the front. Here's some updated pics. I'll post more once it's installed.[/QUOTE
Looks good what measurement did you bent the front and back at?

Lyndon Dale Cook

Looks real good What year is your truck

DarkHelmet314

Love the plates. Job well done

Lisekwr

[QUOTE=dubless;1028097]That does look great! One thing, if you have access to a bead roller, roll a few beads side-to-side. It'll add a bit of rigidity to it, especially since your mounts are in the far corners of the piece. Other than that, awesome work![/QUOTE

You still have the skid plate dimensions available?

I want to get a set made for my truck also, as they are 'ot availble here in Poland

Lisekwr at yahoo.com

Wes