coley909

Today I rotated the tires after alignment and upper ball joints because of some ware on the front tires. I began with a 19mm deep well socket, got 2 off and found it's a 22mm socket that had been taken off before hand with a shallow socket so it's twisted half way.

I tried using the provided tool to remove the lug's under the seat in the truck and that didn't come close to fitting.

I need to replace all of them with the same size lug's but I am not sure what the stock size is. The 19mm look to small in the hole on the wheel they hold but look tiny. The 22 fill it in nicely but I still don't know what size either are or if that is stock.

Thanks for any help.

21RRF150

iTrader: (1)

Not sure i totally understand what happened to you, lol! But all the lugs on my truck are 21mm. But i have a '10 STX. Idk if different level trims, with different wheels, have different sizes

coley909

They may but I can't imagine either of these are stock my 09 xlt will probably be the same as you just need a length and width to look for I'm at a loss

fuelkl

I went for a rotation and the tire shop showed me I had some "swollen" lug nuts and said this is COMMON! I need to get it to ford before warranty's up.

08screwCA

21mm for me too

coley909

What size are the lugs besides 21mm

stronger800

I've had three, all 21

coley909

Trust me it was a 19mm which fit perfect and a 22mm that was snug had to wiggle it out of the socket to get it free.

f6bits

Maybe your nuts shrank. Do you live in a cold climate?

21RRF150

iTrader: (1)

Were these 2 separate size lugs only on 1 wheel? Or throughout all 4?