Looking for Advice- (HID-C-Clamp Blackout)
#1
Senior Member
Thread Starter
Looking for Advice- (HID-C-Clamp Blackout)
Since I keep going back and forth I'd figure I'd ask....
" note Bumpers, Door handles will be darkened "
i'm send my Hids out to Raptor Retrofit to get my chrome hids split and sprayed. also adding a switchable C-Clamp-... anything else i should add. was leaning-
c-clamp (switchable)
dual led strips (amber)
red back lit lens-
but also love the led ring .......
just looking for what would you do and why ??
http://www.raptorretrofit.com/09-14-f150-oem-hid/
and the truck-
" note Bumpers, Door handles will be darkened "
i'm send my Hids out to Raptor Retrofit to get my chrome hids split and sprayed. also adding a switchable C-Clamp-... anything else i should add. was leaning-
c-clamp (switchable)
dual led strips (amber)
red back lit lens-
but also love the led ring .......
just looking for what would you do and why ??
http://www.raptorretrofit.com/09-14-f150-oem-hid/
and the truck-
Last edited by freddyttt; 05-29-2017 at 10:25 AM.
#3
I don't think the switch back C-Clamps and dual amber strips would look bad, as long as they match each other along with the Raptor running lights in the grille. I think that things go from clean to gaudy real quick when lights do not match. I personally do not care for the rings or the back lights.
I also think I would only spray the chrome parts in the lights a gloss black and keep the gray the same color, I think the colors would tie in really well with your truck.
Mickey
I also think I would only spray the chrome parts in the lights a gloss black and keep the gray the same color, I think the colors would tie in really well with your truck.
Mickey
#4
Senior Member
Thread Starter
Thanks.....
I'll keep this thread posted !!!
sending out tomorrow .
I'll keep this thread posted !!!
sending out tomorrow .
#5
Member
Other than the better bulbs and projectors, I would only get the 2 led strips, my mom's Mustang came with them 2015 and would still look oem.
.
.
#6
Blackout
iTrader: (1)
When/if I do my factory hids.... a simple halo ring around the projector and led strips above/below the "f150" in the housing. Maybe some demon eyes. Couple all of that with an evox-r and call it a day.
I'm a fan of simple. Some of the headlights are way over done. It looks like a Christmas decoration rolling down the road. I say stay simple.
I'm a fan of simple. Some of the headlights are way over done. It looks like a Christmas decoration rolling down the road. I say stay simple.
The following users liked this post:
freddyttt (05-30-2017)
#7
Senior Member
Thread Starter
When/if I do my factory hids.... a simple halo ring around the projector and led strips above/below the "f150" in the housing. Maybe some demon eyes. Couple all of that with an evox-r and call it a day.
I'm a fan of simple. Some of the headlights are way over done. It looks like a Christmas decoration rolling down the road. I say stay simple.
I'm a fan of simple. Some of the headlights are way over done. It looks like a Christmas decoration rolling down the road. I say stay simple.
Lights have been sent and am leaning this way......
ty
The following users liked this post:
one2nine (05-31-2017)
Trending Topics
#8
I would look at doing something with the F150 in the lights as well. Here is a shot of mine as repainted them and added the switchback C-Clamp halo's.
Before:
After:
Before:
After:
The following users liked this post:
freddyttt (06-01-2017)
#9
Senior Member
Thread Starter
#10
Some headlight inspiration pics i have saved. Personally I think the strips look out of place without the halo around the projector, but I think the strips and halo look too crowded when you add the C bar light. Personally, i'd say either do C bar + demon eye, C-bar + halo and demon eye or halo and demon eye + strips
mine
a mockup i did of just halos and strips.
mine
a mockup i did of just halos and strips.
Last edited by cmbezln; 06-01-2017 at 11:01 AM.