Logo puddle lights
1 Attachment(s)
So Lincoln is doing this with the 2015 Navigator. How hard would this be to do on my 2012 Platinum?
Attachment 571717 |
not easy because you would need a projector lens and also it would have to be focused
|
They sell them on eBay I believe. Some people mount them on the bottom of the door so when you open it, it projects a logo.
Here is the one with the ford logo. http://bit.ly/1l77EVP |
Not to hard at all! All you have to do is drill a hole in the bottom on the door and buy a set of these (see link). I know if you search you will find a company that will do custom ones so you could come up with the design you want and they will produce it!
http://www.ebay.com/itm/2x-Ford-Logo...-/271429817277 |
Originally Posted by Bdukes55
(Post 3375648)
They sell them on eBay I believe. Some people mount them on the bottom of the door so when you open it, it projects a logo.
Here is the one with the ford logo. http://bit.ly/1l77EVP I have been working on a new logo for it (the limited logo that is embedded in our seats.) The problem came when i got the lights and took them apart. There is a small plastic ring with the logo in it. The logo is about 1/4 inch max within this ring. It will be difficult to get my image to print so small on clear film with enough detail where it will look good projected. I planned on tackling this a bit on the weekend and see what i can get working. I wont install them with the ford logo as is. |
Originally Posted by Bdukes55
(Post 3375648)
They sell them on eBay I believe. Some people mount them on the bottom of the door so when you open it, it projects a logo.
Here is the one with the ford logo. http://bit.ly/1l77EVP |
Originally Posted by ianinedm
(Post 3375663)
I bought the same ones for my truck. I don't like the ford logo at all, it seems really cheesy.
I have been working on a new logo for it (the limited logo that is embedded in our seats.) The problem came when i got the lights and took them apart. There is a small plastic ring with the logo in it. The logo is about 1/4 inch max within this ring. It will be difficult to get my image to print so small on clear film with enough detail where it will look good projected. I planned on tackling this a bit on the weekend and see what i can get working. I wont install them with the ford logo as is. |
The ones I posted come on with the puddle lights when you unlock the door, not when you open it. Seems like I would be able to modify my existing puddle lights to make this happen.
|
Originally Posted by SurebutterCringe
(Post 3375774)
The ones I posted come on with the puddle lights when you unlock the door, not when you open it. Seems like I would be able to modify my existing puddle lights to make this happen.
|
Originally Posted by mamonti
(Post 3375672)
I wish I had that link to the company that will do custom ones,, I know it is out there and I should have saved it. I wondered if they would look as good as they show and thanks for letting us know they will not. Of course there may be a couple of different companies making these and the quality may be a lot better.
|
All times are GMT -4. The time now is 06:09 PM. |
© 2024 MH Sub I, LLC dba Internet Brands