Aerocoupe

iTrader: (1)

Ran across this thread as I was looking for locking lugs for my '14 Limited. I damaged two of the stock lugs removing them from the 21mm socket (had to use a punch) so I thought it would be a good time to get locking lugs. I've always ran Gorilla locking lugs on my vehicles with desireable wheels so that is what I looked for. The local Discount Tire stocks them and assured me they were correct. Well the thread pattern was correct and the length is correct but the face of the cone is half of what is on the stock lugs. I went to the dealer and got two stock lugs for the wheels as I was completely uncomfortable with the aftermarket lugs not having as much area on the cone face.

With all that said the part number for the factory 22" wheels on my '14 Limited is 4L3Z-1012-A. Just wanted to say thanks for the part numbers above as it was on the money. Parts guy asked for my VIN and checked to make sure I had the 22's. Was nice knowing the part number ahead of time to verify I was getting the correct lug.

Side note is that use of an impact gun is not recommended on the stock lugs. It damages the lugs and makes it difficult for the 21mm socket to fit on them correctly. This was evident when I removed mine. I have a couple more that are borderline so I will continue to look for an aftermarket solution as the stock ones are way too expensive.

Aerocoupe

iTrader: (1)

I did find that Gorilla makes a stock replacement set of lugs for the wider faced lug nuts like on the Limited's 22 inch wheels. They call them a Factory Style Bulge XL with P/N 61108CXL. Thread on them here:


https://www.f150forum.com/f38/gorill...estion-292105/