Lights behind the grill
The following users liked this post:
XLTinSD (12-10-2013)
#122
How was I being the thread *****hole? He was claiming a 30" bar would fit in the bumper hole when it is clearly impossible without cutting metal. Not being an *****hole just making sure the right info was put out there. Now your statement on the other hand was an "@**hole" remark.
#123
What kind of bars are most guys running? I've seen the sticker price on the Rigid 30" bars and cried a little bit. Is anyone running imports or any other lower priced bar? What did you think about them?
#124
Senior Member
Heres my set up. PIAA head lamps (cold white) PIAA fogs with green laminex tint. I got green because I like to be different haha and then 2 100W 6" Off road lights. Then lastly the smallest lights that get the most attention my 4 LED amber lights in behind the grill.
#125
TTV6>V8
You can find vendors on here that sell rigid for about 20-30 percent off MSRP. There is a few "budget" brands that have a big following and are, at least from what I've read, holding up and performing quite well. There is a guy on the Alberta F150 thread that sells them. His name is Eric Hu. Butters might be able to refer you to what his screen name is on here. He sells his brand Hanning Leds. Maybe check out google.
#127
2013 5.0 SCREW FX4
#130
TTV6>V8
Thanks guys.
Butters, the brackets were made by a guy that I know. He owns a custom shop here in Edmonton. Does great work. He owns Lacustoms on the yellowhead. His name is Travis if you ever need custom work done in Etown.
Butters, the brackets were made by a guy that I know. He owns a custom shop here in Edmonton. Does great work. He owns Lacustoms on the yellowhead. His name is Travis if you ever need custom work done in Etown.