zx14_rider

Mine popped out of the bumper easy enough but they are not coming apart its almost looks like a sealed unit that you replace the whole thing ??

I'll dig into it some more when I get back home around the middle of the week..

Thanks for the replies.

tuxedoblack11

Twist them counterclockwise and hold the front light. They do come apart!

zx14_rider

ok will do !!

AroundtheF150

Just reach behind the bumper, twist counter clockwise, light out.

zx14_rider

I finally got them apart and it was pretty simple (thanks again), only problem is the LED's I bought are too big.... . So this mod is still not completed..

No big deal I'll use them in the Peterbilt..

Donut

Too big as in too tall?? If they are just tall I may have a solution... Mine were too tall but simple trimming and fits like a glove. . If they are big though or the wrong lights...

They should be the 194 T10

zx14_rider

Too long or tall they need to be shorter so I can screw the harness back in..

Donut

Ok. I'll go take a pic of what I did and post it up to show you.

Donut

Ok so all I did was take my knife and simply trim part of the body away on both sides. It took me literally 15 seconds haha. I tried for like 30 min trying to jam these lights into the housing before I decided to cut them. Both work great now! . You might still have to put some force into getting the socket to twist back in place...but nothing compared to them not being trimmed. Hope this helps!

zx14_rider

Thanks man much appreciated !!