License plate lights (LED's)
#11
Big Mike
Thread Starter
Mine popped out of the bumper easy enough but they are not coming apart its almost looks like a sealed unit that you replace the whole thing ??
I'll dig into it some more when I get back home around the middle of the week..
Thanks for the replies.
I'll dig into it some more when I get back home around the middle of the week..
Thanks for the replies.
#12
F150 Forum
Originally Posted by zx14_rider
Mine popped out of the bumper easy enough but they are not coming apart its almost looks like a sealed unit that you replace the whole thing ??
I'll dig into it some more when I get back home around the middle of the week..
Thanks for the replies.
I'll dig into it some more when I get back home around the middle of the week..
Thanks for the replies.
The following users liked this post:
zx14_rider (10-07-2012)
The following users liked this post:
zx14_rider (10-18-2012)
#15
Big Mike
Thread Starter
I finally got them apart and it was pretty simple (thanks again), only problem is the LED's I bought are too big.... . So this mod is still not completed..
No big deal I'll use them in the Peterbilt..
No big deal I'll use them in the Peterbilt..
#16
Boomer Sooner!
Originally Posted by zx14_rider
I finally got them apart and it was pretty simple (thanks again), only problem is the LED's I bought are too big.... . So this mod is still not completed..
No big deal I'll use them in the Peterbilt..
No big deal I'll use them in the Peterbilt..
They should be the 194 T10
#18
Boomer Sooner!
Originally Posted by zx14_rider
Too long or tall they need to be shorter so I can screw the harness back in..
The following users liked this post:
zx14_rider (10-18-2012)
#19
Boomer Sooner!
Ok so all I did was take my knife and simply trim part of the body away on both sides. It took me literally 15 seconds haha. I tried for like 30 min trying to jam these lights into the housing before I decided to cut them. Both work great now! . You might still have to put some force into getting the socket to twist back in place...but nothing compared to them not being trimmed. Hope this helps!
The following users liked this post:
zx14_rider (10-18-2012)