blloydapd105

Hey guys, I have a 2013 XLT sterling gray metallic 4x4. I am looking to install a leveling kit. I would love to go with a 6in suspension lift, but the budget won't allow for that right now. I have decided to go with the autospring leveling kit after doing a good bit of research. My question is whether I should go 2" or 2.5". Right now I have about 2.25" of rake. I don't tow heavy weight. I pull a utility trailer with a zero turn mower, but that is usually it. Thanks for the help.

Ray County Hank

iTrader: (1)

Get the 2.5 front and 3'' AS rear blocks! I used a RC 2.5 with rear add a blocks and it wasnt long before I ordered and installed the 3'' AS rears. If you haul anything at all, you will appreciate an inch or inch and a half or so of unloaded rake.

blloydapd105

Any pics of your trucks and descriptions of what you guys have would be helpful as well.

Commeeche

I did a ready lift 2.5" in the front and a 1.5" block in the rear, it brought the rear up just enough so it looks level with the front. I pull a car trailer every weekend and never had any issues