Lets see those Leveled out f150s!!!!
#4031
Kickin it
You're gonna be cutting metal brotha. Have your dremel/sawzall/body saw ready.
I also recommend putting some washers in between your front bumper mount to space it up a bit
I also recommend putting some washers in between your front bumper mount to space it up a bit
#4034
Senior Member
I wish Amp made power steps for a regular cab. I'm going to keep an eye out for a used set from a Scab or Screw and make my own.
I finally got a chance to clean her up. It was pretty rough from sitting on the dealers lot for over 8 months without a coat of wax...clay bar city and lots of polishing.
#4035
Senior Member
The 1.5" kit worked well for me. It left me with about .75" of rake which is what I was hoping for. You never know with leveling spacers, some trucks get the advertised amount of lift and some get more?? and not all trucks have the same amount of rake to start with. I wish Amp made power steps for a regular cab. I'm going to keep an eye out for a used set from a Scab or Screw and make my own. I finally got a chance to clean her up. It was pretty rough from sitting on the dealers lot for over 8 months without a coat of wax...clay bar city and lots of polishing.
#4036
Senior Member
The 1.5" kit worked well for me. It left me with about .75" of rake which is what I was hoping for. You never know with leveling spacers, some trucks get the advertised amount of lift and some get more?? and not all trucks have the same amount of rake to start with.
I wish Amp made power steps for a regular cab. I'm going to keep an eye out for a used set from a Scab or Screw and make my own.
I finally got a chance to clean her up. It was pretty rough from sitting on the dealers lot for over 8 months without a coat of wax...clay bar city and lots of polishing.
I wish Amp made power steps for a regular cab. I'm going to keep an eye out for a used set from a Scab or Screw and make my own.
I finally got a chance to clean her up. It was pretty rough from sitting on the dealers lot for over 8 months without a coat of wax...clay bar city and lots of polishing.
The following users liked this post:
Ecoengineer (10-19-2014)
The following 2 users liked this post by smcox1:
NASSTY (10-19-2014),
Ousooner0104 (10-19-2014)