effonefiddy7

18x9 with a -12 offset and nitto terra grapplers 325/60

effonefiddy7

Had to do a lot of trimming

jt16xlt

By chance are those Black Rhino MOABs? If so can you get a straight side shot and maybe a closer pic?

slimcubby

iTrader: (1)

They look more like xd addicts to me.

effonefiddy7

There xd addicts

2008f1504x4

Just how much trimming and which level? I wanna try an run 295/70/18's on my -12's but I know I'm going to rub but if it's just plastic I'll cut it all lol

effonefiddy7

2 inch level and I had to cut some plastic on both sides take and bolt some plastic back to keep from rubbing when I'm backing up and also had to do a little grinding but she's clearing good now..

Bravesooner

It's what I have on my truck, I would recomend it. Zero complaints from me.

2008f1504x4

I assume when you say grinding you mean on metal?

mustangmike6996

Well... I need some assistance on a leveling kit. I had an 08 XLT ext cab 6.5 ft bed and did a 2 inch kit and it came out pretty good.

I now have a 2013 XLT ext cab with a 6.5 ft bed. I measured the ride height and the front is 37.75 and the rear is 40.25. Doing the math, that puts me right at 2.5 for the leveling (which i would like to get right the first time.)

The truck has about 350 miles on it. Im assuming it wont settle too much more (most of my vehicles that were new came out and stayed at the same height) Can anyone confirm this. I dont mind the rear being slightly higher but I prefer the truck to be level if I have the choice.