M0RRIS

Pic or link?

SPLACK

timbren fr1504d https://www.ebay.com/itm/380595284803

Jamie Lampert

So I have a 2014 STX with 18" stock wheels. What leveling kit do you recommend and what height?

M0RRIS

Go measure your heights at the front and rear wheelwells. Then decide.

M0RRIS

Back from the alignment place.
2.25" setting on the 5100's. Rear is stock with 5100's back there too. Tires will be on in the next few days.




I do have a problem though, my truck has a hum now. Searching the web is coming up with the vacuum lines for the IWE. I knew it could be a problem and is one reason I let a shop install my front 5100's. I'll be taking it back to them for that reason and for the steering wheel possibly off center.

If any of you guys have input about my hum please feel free to add it.

It does ride a little rough as some would put it but I understand they are a superior strut than the factory ones and let you know when and where each bump is. Tires go on Friday so I'd like to get to the bottom asap.

M0RRIS

Stock height with 5100's in the back



2.25" setting, front and rear bilstiens installed.



The angles don't look bad to me.

sandfreak

​​​​​​which level, and what's the wheel offset. Nice truck.

jmodano

With 2.5" level, stock wheels and tires.



With 2.5" level. New shoes

Bumpncarstereo

Bilstein 5100's on the second from the top setting. Also upgraded to 275/70/R18 tires at the same time.

RedsRock302

My hooptie.