Lets see those Leveled out f150s!!!!
#6142
I installed a sidewinder hitch on the camper for turning, if I went any higher with the rear of the truck the camper would contact the tail gate (the camper axels are flipped already) . PS I am going to pull an 18 foot boat this summer behind the camper.
The following 2 users liked this post by T2eco:
1oldtimer (02-15-2016),
KScountryboy (02-10-2016)
#6143
Finally got my new rims put on. I have been dreaming of getting some fuel rims ever since I bought my truck. Looks pretty awesome! I love the offset of them that makes them stick out further and look like I have a bigger tire. I was wanting to get 33x12.5 tires but now I don't see the need.
#6146
I REALLY need to do something about my XLT's plasti-chrome grille, but I don't want to pay $400 for a Ford OEM grille.
Will pasti-dip stay on? Any decent aftermarket grilles? Simple all black 3 or 5 bar grille is really all I need. A black FX2 grille would be ideal if it's plug & play?
Thoughts?
Will pasti-dip stay on? Any decent aftermarket grilles? Simple all black 3 or 5 bar grille is really all I need. A black FX2 grille would be ideal if it's plug & play?
Thoughts?
The following users liked this post:
NASTYXLT (02-12-2016)
#6149
Senior Member
I REALLY need to do something about my XLT's plasti-chrome grille, but I don't want to pay $400 for a Ford OEM grille.
Will pasti-dip stay on? Any decent aftermarket grilles? Simple all black 3 or 5 bar grille is really all I need. A black FX2 grille would be ideal if it's plug & play?
Thoughts?
Will pasti-dip stay on? Any decent aftermarket grilles? Simple all black 3 or 5 bar grille is really all I need. A black FX2 grille would be ideal if it's plug & play?
Thoughts?
I did my grill almost a year ago now with Plasi dip. Been through many car washes and rain/snow storms and still looks great. The trick is prep, wash real good with soap and water then when dry rub down with alcohol then make sure it's dry before spraying. When you spray it start with a real light coat, let it dry then repeat at least 4 times.
I did the whole thing at first but it was to much so removed the paint off the outer ring
The following 2 users liked this post by Sirikenewtron:
darrylgibbs (02-11-2016),
NASTYXLT (02-12-2016)
The following users liked this post:
JBReid (02-11-2016)