LED Hyper flash taillight
Thread Starter
Junior Member
Joined: Dec 2022
Posts: 1
Likes: 0
LED Hyper flash taillight
2013 Ford F150 XLT 2WD. I replaced the headlights with LED bulbs and the taillights with aftermarket LED complete replacement. Now I'm getting hyper flash on both sides with the driver's side rear blinker not working. When I turn on the hazards, there is no hype flash, however the driver's side rear blinker still does not come on. I've looked and tried everything to solve this issue.
Senior Member
Joined: Jul 2015
Posts: 10,934
Likes: 2,457
From: Minneapolis
![[F2C]MaDMaXX's Avatar](https://www.f150forum.com/customavatars/avatar324923_9.gif){kind=avatar}
Dielectrically 5w30
Joined: Jan 2020
Posts: 13,263
Likes: 5,463
From: Oregon
Turn the bulbs over, some LED's are polarity sensitive.
For the hyperflash you can put in resistors or you can get Forscan and turn off the bulb out warning.
For the hyperflash you can put in resistors or you can get Forscan and turn off the bulb out warning.
Senior Member
Joined: Jan 2018
Posts: 526
Likes: 169
Turn the bulbs over, some LED's are polarity sensitive.
For the hyperflash you can put in resistors or you can get Forscan and turn off the bulb out warning.
For the hyperflash you can put in resistors or you can get Forscan and turn off the bulb out warning.
Last edited by hinglemccringleberry; Dec 12, 2022 at 06:00 PM.
Dielectrically 5w30
Joined: Jan 2020
Posts: 13,263
Likes: 5,463
From: Oregon
