key fob issue
#1
Senior Member
Thread Starter
key fob issue
So I have been having this issue. I have remote start and I tried starting it the other day and it didnt do anything so I tried unlocking the truck and nothing wanted to work tail lights did not flash I had to use my key to unlock the truck. I started the truck drove home and after I parked at home I tried again and everything works fine. Today after I got off work I was having the same issue. I dont want to take it to dealer cause they wont do anything if it doesnt happen to them. I looked under the hood and cables to battery were tight. Any ideas??
#3
Senior Member
There is actually a TSB for this... and all they do is change out the silicone piece in the key with one of a slightly different design
Here:
http://www.revbase.com/BBBMotor/TSb/...dPdf?id=182438
Here:
http://www.revbase.com/BBBMotor/TSb/...dPdf?id=182438
Last edited by SuperCruzin; 08-15-2014 at 07:19 PM.
The following users liked this post:
frdrdr4life (08-15-2014)
#4
Senior Member
Thread Starter
There is actually a TSB for this... and all they do is change out the silicone piece in the key with one of a slightly different design
Here:
http://www.revbase.com/BBBMotor/TSb/...dPdf?id=182438
Here:
http://www.revbase.com/BBBMotor/TSb/...dPdf?id=182438
#7
Senior Member
YW!
to open... stick a coin or flat head in the one open corner next to where the key ring goes, one side has a larger gap, you will see it.
one of my fobs is doing the same thing... I've been getting pretty sick of the race to the ignition to avoid the alarm.
to open... stick a coin or flat head in the one open corner next to where the key ring goes, one side has a larger gap, you will see it.
one of my fobs is doing the same thing... I've been getting pretty sick of the race to the ignition to avoid the alarm.
Last edited by SuperCruzin; 08-15-2014 at 08:00 PM.
Trending Topics
#8
Member