94-F150-10

His truck IS a 2010.

hardhat

OP I would run 35x12.50's or 325/65-18, it would save you a lot of problems and still look badA. Also go to 4.10 or 4.56's.

mariano

just an update guys,
just installed a 1" spacer on the front, trimmed the bumper and the back of the inner fender too, still touches sometimes at full turn when the surface its not level or entering the highway on a tight turning ramp, i think i can live with that, no prob,
just installed the tunning from mikes at 5stars and its running a lot better now in the hwy, although i think my speedo is still misreading,
still have to find a good shop here in south fl to install the 4.56 rearend that i bought, went to the dealer and they quotme $1,300 even though i have the kit,
i think its too much.
Thank you all
and will keep you posted
Mariano

94-F150-10

$1300 is way too much just for labor. The shop I used charged $600 for labor. I had gotten a quote from my dealership and they wanted $2300 parts and labor for both axles but would only do 4.10 because that's all ford makes.

chovyman

Truck looks really good

Sounds like gears and trimming if you really want to run those monsters

nix150

get some pics up!

Big iv

Zone tells you the max tire on 18s you can run is a 37x13.50. You have a 14inch wide tire. There's your problem. Your welcome

TheBlack2011FX4

This is from July.. I think he realizes what his problem is/was...

RES4CUE

True but because rarely anyone does a conclusion write up, people keep posting.

Big iv

I was bored lol