Installing level kit 2011 FX4
#1
Junior Member
Thread Starter
Join Date: Sep 2011
Location: Ohio
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Installing level kit 2011 FX4
Hey guys, I'm finally going to put the level kit on my 2011 FX4. I have the Daystar 2" kit. I'm curious about any sticking points or unforeseen difficult parts of the project I could look forward to seeing during installation.
The following users liked this post:
ns_redneck (01-03-2014)
#5
Junior Member
Thread Starter
Join Date: Sep 2011
Location: Ohio
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
#7
It had to be done for the kit to fit! I'm getting ready to put a 2.5 spacer on so I will need new strut mounts since I cut the bolts on the old. Unless I can get the adapters off then I can reuse them
Trending Topics
#8
Junior Member
Thread Starter
Join Date: Sep 2011
Location: Ohio
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
#10
<b>F150 Forum</b>
It should be a fairly easy install, follow instructions and start in the morning to give yourself plenty of time.
Last edited by HaloLifts; 01-03-2014 at 10:40 AM.