Annoying light shinning from sun/moon roof, fixed!
#1
Senior Member
Thread Starter
Annoying light shinning from sun/moon roof, fixed!
For those with a Sun/Moon Roof, I'm not sure you experience it but for me when I slide the cover back in place there is always a gap letting the light shine through....so for 3 bucks and 30 minutes this is my fix! Hope this helps others!
from homedepot, I purchased some corner guard found in the paint section. it has a right angle L and is clear.
my simple steps were:
1. cut to fit just over the guide rails of the cover.
2. mark off the 2 humps, and cut those out so the majority of the trim piece will rest flush.
3. sand the plastic, and paint as desired (I used a spare can of black plastidip)
4. apply double sided tape
5. mount and enjoy no sun in eyes
from homedepot, I purchased some corner guard found in the paint section. it has a right angle L and is clear.
my simple steps were:
1. cut to fit just over the guide rails of the cover.
2. mark off the 2 humps, and cut those out so the majority of the trim piece will rest flush.
3. sand the plastic, and paint as desired (I used a spare can of black plastidip)
4. apply double sided tape
5. mount and enjoy no sun in eyes