Installed AS 2.5, 35's and Bistein 5100's
#11
Member
Not sure why you would use spacers and bilsteins....anyways, I have a 2 inch HBS spacer kit and it only makes noise when I hit a speed bump at speed. Idk, I installed myself and tightened everything for sure. Oh well.
#12
Member
I put it on so soon, I can't remember how it sounds stock.
#13
Senior Member
Mine makes no noises what so ever at 2.25 setting. The only time I get sound is if I hit a speed bump at speed and that is because the spring is preloaded but its not a mechanical metal on metal clunk.
#14
Senior Member
Thread Starter
Update: Ford dealer mechanic did not tighten the middle bolts on top of the struts. They were a quarter inch loose. They must have tightened everything in the air and when the truck was dropped they loosened.
Thanks for the great advice on checking them.
Thanks for the great advice on checking them.
Last edited by jmoore9; 04-06-2013 at 05:43 PM.
The following users liked this post:
RES4CUE (04-06-2013)
#15
Senior Member
I have heard of others doing the spacers and 5100's. The possible advantage to this is you get the upgraded Bilsteins without the added preload if you raise them to a higher setting. You still get the level without the preload and a better shock. Most do either or but this is an interesting option.