How can I add 1 inch to the rear?
12-04-2013, 07:13 PM
#1
Senior Member
Thread Starter
How can I add 1 inch to the rear?
My 2.5" is level but I'd like a wee bit in the read.
12-04-2013, 07:26 PM
#2
Senior Member
Buy an add-a-leaf and install it. Autospring sells one rather cheap. It does stiffen up the rear suspension some but is better than a taller block in my opinion.
12-04-2013, 07:29 PM
#3
Senior Member
Thread Starter
Do they sell a 1"?
12-04-2013, 07:32 PM
#5
http://4x4.fatbobsgarage.com/ford-f1...13-p23369.aspx
Go with this ^ and remove your factory block. About a little less than 1" lift net and helps with rear axle wrap.
Go with this ^ and remove your factory block. About a little less than 1" lift net and helps with rear axle wrap.
12-04-2013, 07:34 PM
#6
<b>F150 Forum</b>
The stock rear block is 1.25". We make a 2" block just for leveling when using our 2.5" front spacer or our Adjustable Coilovers.
Alex
Alex
12-04-2013, 08:26 PM
#7
Senior Member
Trending Topics
12-04-2013, 09:25 PM
#8
<b>F150 Forum</b>
Please visit our website www.F150Lifts.com you can still use Cyberman and get 10% off!
Last edited by HaloLifts; 12-04-2013 at 09:40 PM.
