nolagtime

I cannot find the solution in the wheel/tire sticky.
I have a procomp 6" lift on my 2012 4wd. Had 35" Durun Terrain Grabber MT's on but they would not balance properly, so I have put some 34" (275/65/20) Hankook Dynapro ATm on for winter. They look way to small. What I would like to try is a set of 18" or 20" with 37x12.50 rubber, Toyo AT or Yokohama AT's.

Has anyone tried this? What size rim? What offset or backspacing so as not to rub the upper control arm on the Procomp lift?

chris_bryan_89

Post #3. HK's truck with 6" and 37's

https://www.f150forum.com/f38/bds-li...0-f150-106138/

fx4life79

Need the right wheel and bs but its doable, prolly may have to trim slightly

nolagtime

From reading his thread, those pics are with the 8" lift though? And no mention of what backspacing the wheel is so that it clears the upper control arm. On the Procomp 6" lift, the stock wheels rub hard.

chris_bryan_89

The very first pic in that thread was the stock bds lift. Then he upgraded to the pro comp coil overs and made it an 8"

heydustin

Hk has a bds lift on. And 37's fit if u have the bds kit whit 5,5 back spacing.