Green Gem Owners
Finally got the new shoes on... i know its my truck but the thing just looks nasty with this wheel and tire combo the offset is exactly what i was looking for... the actual tread on the rear is dead even with the fender not outside not inside... dropstar 645b 18x9 with a +18 offset and a 275/70r18 nitto trail grappler...
Nice man. ill take pics this weekend. I did my smittybilt grille yesterday and I plan on replacing my grat door panels with the black fx4 ones. install the center console and put my summer tires on. I'll post pics this weekend at some time
well guys I did a few mods today. first was the smittybilt grill. followed the directions and wasn't impressed that the grill didn't fit properly I had to either wait weeks to get a replacement and have a giant hole in the grill or trim into the green of the grill. well I choose the second option on the plus side the m1 grill covers those cuts so I guess ill live with it. although I'll always know I had to trim more of it. after that was done it was onto the console. I followed directions off YouTube on how to get the side pieces off took 5 mins to don the console itself took a bit longer. some guys drilled holes into the seat frame I made the holes a bit bigger on the console and reused the factory mounting holes and hardware. I have to figure out a container or something for were the floor shifter assembly was. im still looking for something at stores when im there. took a few houra to do everything and im happy with the results. next on the list is mount my 42" led light bar behind the grill and wire the switch panel feom kustom fx that goes in front of the overhead console. ill post pics when I get there.
well guys I did a few mods today. first was the smittybilt grill. followed the directions and wasn't impressed that the grill didn't fit properly I had to either wait weeks to get a replacement and have a giant hole in the grill or trim into the green of the grill. well I choose the second option on the plus side the m1 grill covers those cuts so I guess ill live with it. although I'll always know I had to trim more of it. after that was done it was onto the console. I followed directions off YouTube on how to get the side pieces off took 5 mins to don the console itself took a bit longer. some guys drilled holes into the seat frame I made the holes a bit bigger on the console and reused the factory mounting holes and hardware. I have to figure out a container or something for were the floor shifter assembly was. im still looking for something at stores when im there. took a few houra to do everything and im happy with the results. next on the list is mount my 42" led light bar behind the grill and wire the switch panel feom kustom fx that goes in front of the overhead console. ill post pics when I get there.
You can get the exact same grill (non smittybuilt) on ebay for $216.
http://www.ebay.com/itm/181797629659
http://www.ebay.com/itm/181797629659






