Getting new legs...(tires and wheels)
#13
Senior Member
do you have the tires yet? How do they look? I am torn between 295/60/20, 35x11.50's, and 35x12.50's. I think the 35x12.50's would be really tight on factory wheels and 2.5" level.
#14
Better OUT then IN
Thread Starter
Join Date: Feb 2011
Location: South Florida (Ft. Lauderdale area)
Posts: 3,343
Received 253 Likes
on
206 Posts
I have the wheels in the bed of my truck now. Will be dropping off the wheels, and black lug nuts to the tire shop that has been holding my Ridge Grapplers for a week.
I'll send pictures after they are installed... tomorrow.
I agree that a 35x12.5 wide tire may be too wide with a 4" lift. That's why I went with an 11.5 instead.
I'll see how it all turns out tomorrow.
I'll send pictures after they are installed... tomorrow.
I agree that a 35x12.5 wide tire may be too wide with a 4" lift. That's why I went with an 11.5 instead.
I'll see how it all turns out tomorrow.
#17
Better OUT then IN
Thread Starter
Join Date: Feb 2011
Location: South Florida (Ft. Lauderdale area)
Posts: 3,343
Received 253 Likes
on
206 Posts
The guy who powder coated them is having professional offroad pictures taken later this week.
Last edited by justjimmy; 11-08-2016 at 04:24 PM.
The following 2 users liked this post by justjimmy:
f150dave2002 (11-09-2016),
PawPaw (11-08-2016)
#20
Better OUT then IN
Thread Starter
Join Date: Feb 2011
Location: South Florida (Ft. Lauderdale area)
Posts: 3,343
Received 253 Likes
on
206 Posts
Great question. I had an upgraded exhaust on my 2011 FX2 and the drone drove me nuts on long highway trips.
I like the V8 rumble but I can't seem to get a definitive answer on a good exhaust note with no drone so for now, not in my current plans.
I like the V8 rumble but I can't seem to get a definitive answer on a good exhaust note with no drone so for now, not in my current plans.