jdm1904

So my 13' FX2 has a "gauge mode", one is the Transmission Temp, the other screen is blank. Can I add anything to this to monitor? or is it always going to remain a dead screen?

130428

it's the screen of the death, I have yet to read about anyone adding anything there
I think mine has some trailer info there (2nd screen), might be part of the Tow Package, cant remember.

jdm1904

I have trailer sway controller on a different screen. its the very top mode on the screen that has me stumped!

bnorth

I think it's supposed to be blank for driving at night, less glare.

roushxlt

mine has the trans temp and a compass

RLXXI

I have 3 pages in that menu. 1st screen is trans temp, 2nd screen is a compass, 3rd screen is blank.







.

jakesford

You get the compass if you don't have MFT display since there is a compass/nav in the info section.

jchargu3

edit: I am retarded and posted a response int he wrong thread.

sigma pi

Quit holding out! Tell us what you Canadians have extra!

jesusv

iTrader: (1)

Not sure if you guys know this, but if you're in the transmission temp guage mode and you have the middle shifter with the mt option, press the plus sign on the shifter while in drive. This will engage shift points on the screen. From 1-6, each gear highlights as you drive and shifts through gears in automatic. I discovered this by accident, I never use mt, but I like seeing the gears shift, especially with my tune. This will stay on, no need to do it every time you turn on the truck. Press the minus button to disengage.