Gauge Mode on dash
#1
Gauge Mode on dash
So my 13' FX2 has a "gauge mode", one is the Transmission Temp, the other screen is blank. Can I add anything to this to monitor? or is it always going to remain a dead screen?
#2
Senior Member
it's the screen of the death, I have yet to read about anyone adding anything there
I think mine has some trailer info there (2nd screen), might be part of the Tow Package, cant remember.
I think mine has some trailer info there (2nd screen), might be part of the Tow Package, cant remember.
#3
I have trailer sway controller on a different screen. its the very top mode on the screen that has me stumped!
#6
Member
The following 2 users liked this post by jchargu3:
Feathermerchant (02-20-2015),
sigma pi (02-20-2015)
#9
Senior Member
#10
Senior Member
iTrader: (1)
Not sure if you guys know this, but if you're in the transmission temp guage mode and you have the middle shifter with the mt option, press the plus sign on the shifter while in drive. This will engage shift points on the screen. From 1-6, each gear highlights as you drive and shifts through gears in automatic. I discovered this by accident, I never use mt, but I like seeing the gears shift, especially with my tune. This will stay on, no need to do it every time you turn on the truck. Press the minus button to disengage.
The following users liked this post:
SWBF150 (02-21-2015)