fox 2.5 coilovers and 2.0 rear shock
#201
I Wanna Go FAST!!!
Join Date: Feb 2010
Location: Ramona, Ca
Posts: 824
Likes: 0
Received 0 Likes
on
0 Posts
bumping an old thread
I know this is 09-14 but I just did the FOA coilovers on my 07, the front strut mount is pretty much the same. Anyways I see a bunch of you have your resvoir mounted on the strut mount was just wondering how u went about doing that. thanks
I know this is 09-14 but I just did the FOA coilovers on my 07, the front strut mount is pretty much the same. Anyways I see a bunch of you have your resvoir mounted on the strut mount was just wondering how u went about doing that. thanks
#202
Senior Member
Say What?
Can't Go wrong with Fox coil overs .... My truck rides great with them
#203
I Wanna Go FAST!!!
Join Date: Feb 2010
Location: Ramona, Ca
Posts: 824
Likes: 0
Received 0 Likes
on
0 Posts
I found these by Synergy manufacturing, think im going to try them. if no one chimes in.
http://www.4wheelparts.com/Fabricati...t_pn=SYN4025-S
http://www.4wheelparts.com/Fabricati...t_pn=SYN4025-S
#205
In all my research on fox/camburg coiler upgrades, I only found the ones that can level 2". I am interested now that I know they can go 2-1/2" front level. Actually considered others because the only went 2". Icon,CamburgF-150 lifts
hmmmmmmm! )
hmmmmmmm! )
#206
I Wanna Go FAST!!!
Join Date: Feb 2010
Location: Ramona, Ca
Posts: 824
Likes: 0
Received 0 Likes
on
0 Posts
What's everyones ride height front and rear. I'm at 38 3/4 front foa coilovers and 38 in the rear with the 5100s that have about 60k on them. I can adjust the coilovers down it just gonna be a pain with them On.
#207
are you talking about the camburg a-arms? these were not redisigned. these are the a-arms for 2009-10. I highly recommend a specialty frame & alignment shop to get your alignment done. took mine 2x to discount tire center and they were only able to adjust caster not camber. took mine to daves frame & alignment (1 block from camburg)who specializes in offroad truck and did it right the 1st time. had my new set of bfg wear badly after 200 miles. The foa shock rides perfect with 150 psi nitrogen. i can probably go 185psi to make it a little stiffer. as far as springs deavers might sag 1/2 but you can get them ordered stock, or custom lift. my 1st test with deavers came with 1.25 of lift. after a week of testing got them re-arched to stock height. Now they have specs to make them....front springs did not sag at all. Fox coilovers came pre-set to at least 2.5 inches of lift (front look higher than rear).Set my fox coils to 39.5 ( 6 turns less on driver side , 5 turns less on pass side) and rear is now 39.75. also installed firestone airbags in the rear. ** if you are getting fox, king, icon, or saws i recommend removing your front swaybars. these coilovers are soo good that if you leave the swaybars on your limiting the droop travel. remove them and it will ride 10x better. learn that from a highly recognized valving specialist who valves race trucks. truck rides amazing, and its leveled. going to adjust headlights because of lift. pics soon!!